Micsig MS510S

  • Interface: USB 2.0
  • OS: Win

100 MHz, 2 channels handheld multifunctional oscilloscope, multimeter and recorder. The MS510S has serial bus trigger and decoding capabilities, graphic and in text mode.


  • 250MHz, 10X probe
  • Multimeter table pen line
  • Power adapter 100~240V, 50~60Hz, 2A; DC 12V/5A
  • 7.4V/6000mAh lithium battery
  • USB cable: Mini USB 2.0
  • Banana Jack

Micsig MS510S

Spare 35%
  • Interface: USB 2.0
  • OS: Win

art : MS510S
€ 1 770 ohne MwSt € 2 730
€ 2 213 inkl. MwSt € 3 413

Mein AutoQuote

Generieren und verfolgen Sie ganz einfach Ihre Angebote. Sie können auch eine Bestellung basierend auf einem aktiven Angebot aufgeben. Auf Ihrer Kontoseite sind sowohl Angebote als auch Bestellungen für Sie organisiert.

Mehr Informationen


Rise time3.5ns
Real time sampling rateSingle channel: 1GSa/s, dual-channels: 500MSa/s
Memory depthSingle channel: 240Kpts, dual-channels: 120Kpts
Isolated channelYes
Max waveform capture rate190,000 wfms/s
Serial bus triggerUART, LIN, CAN, SPI, I2C, 1553B, 429
Channels2 oscilloscope channels, 1 multimeter channel
Limited bandwidth20MHz
Coupling modesDC, AC, GND
Input impedanceParallel 1M Ohm ±1% with 15pF ±3pF
Vertical sensitivity range5mV/div - 50V/div
Vertical resolution8bits
Max voltage input600V CAT II 300V CAT III
Floating voltage from CHs to GND1000V CAT II 600V CAT III
DC vertical gain accuracy5mV/div - 50V/div, 2.0%
Timebase4ns/divs 10s/divs
Timebase delay range-12divs to 50s
Timebase accuracy20ppm
Sample modeNormal average, pk-pk envelope
Dynamic recordYes
Store waveformYes, support internal waveform storage and flash disk storage
Trigger typesEdge, pulse, logic, video (PAL, NTSC, SECAM, 720P, 1080I, 1080P) serial bus (UART, LIN, CAN, SPI, I2C, 1553B, 429)
Trigger couplingDC, AC, High-frequency suppression, Low-frequency suppression, Noise suppression
Trigger modesAuto, normal, single
Trigger sourceCH1, CH2, external
Trigger inhibition range200ns - 10s
Automatic measurements31 types
Cursor typesHorizontal cursor, vertical cursor, cross cursor
Operator+ , - , * , /
FFT window settingsRectangular, Hamming, Blackman-Harris, Hanning
Display screen5.7 inch TFT LCD touch screen
3D waveform displayNo support
Grid of waveform display zoneHorizontal 12 divs * vertical 8 divs
FormatYT mode , XY mode
Interpolation methodSin(x) /x
PersistAuto, 100ms - 10s or infinity
Mini USB2.0Connect to PC
USB2.0Connect to Flash disk
Multimeter type10 physical measurements such as voltage, current, resistance, capacitance, diode , etc
Multimeter accuracy5000 counts
Multimeter displayMax, average, min, values with time stamp; relative measurement
Logger contentMultimeter measurements, oscilloscope measurements, oscilloscope waveforms
Logger timebaseMultimeter measurements,10s/div ~ 20min/div
Logger timebaseOscilloscope measurements 10s/div ~ 20min/div
Logger timebaseOscilloscope waveform 100us/div ~ 2min/div
Logger time length49s to infinity
Power adapterInput: 100-240VAC, 50-60HZ, 2A; output: 12VDC, 5A
BatteryCapacity: 7.4V/6000mAh, Work time: 4-5 hours
Temperature-20°C - +50°C
Humidity< 85%RH
WeightMain unit: 1380g (no battery), battery(standard): 276g


  • 5.7 inch TFT LCD touch screen
  • 640*480 resolution
  • 100MHz bandwidth
  • 3 operation modes: Touch, Button, Scroll wheel
  • Integrated oscilloscope, multi-meter and recorder
  • 4-5h Li-ion battery
I2C serial bus decoding graphic modeThis mode gives you a graphical view of the serial bus data so you can see address and data in correlation to other signals.
I2C Serial bus decodingThe text view shows the bus data in a list form showing time, address, data and other columns for every bus transaction.
High refresh oscilloscope rateCapture rate means how many waveforms acquisition per seconds your scope can acquire, process and display. "Dead-time" is the time it takes to process and then display an acquired waveform before re-arming it''s triggering for next acquisition. The dead time of traditional oscilloscopes is far more than "display time", making the signal occurred during dead time unable to be captured. High capture rate scopes reduces dead time so that abnormal signals can be caught faster and more accurately.
TriggersBuil-in video triggers for PAL, NTSC, SECAM, 720P, 1080P
31 auto measurementsJust select the type of measurement you want to do and you''ll have the data right on the screen.
DMM13 physical measurements such as AC/DC voltage, current, resistance and many more.

Produits connexes

Zuletzt angesehen