Dediprog SF600 Plus
Fast SPI Flash IC Programmer

  • Devices: Flash
  • Interface: USB 2.0
  • OS: Win
  • Protocol: SPI

High-Speed ISP Programmer

SF600Plus is high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Off line programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.

- High speed USB
- Higher SPI performances
- Support Single, Dual and Quad IO (ISP mode only)

SF600Plus is an upgrade version of SF600. The main difference is that SF600Plus embeds a 8GB memory which allows standalone programming.

What's included

  • 1 x SF600Plus Programmer
  • 1 x USB Cable
  • 1 x AC Power Adaptor
  • 1 x ISP Cable (ISP-600-CB1-G)
  • 1 x SF100 2.54mm 2*4 ISP Cable (ISP1-CB)
  • 1 x SF600 Universal Adaptor (ADP-SF600-TO-SF100)
  • 1 x CD-ROM (Included Software, specifications and user manual)

Dediprog SF600 Plus
Fast SPI Flash IC Programmer

  • Devices: Flash
  • Interface: USB 2.0
  • OS: Win
  • Protocol: SPI

art : SF600_Plus
€ 365 excl. VAT
€ 456 incl. VAT

My AutoQuote | Easy & Fast

Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.

More information


Support all Serial FlashYes
USB High speedYes
In Circuit ProgrammingYes
Off line ProgrammingYes
Stand Alone modeYes
Multi-Programmers USBYes
Engineering GUIYes
Command LineYes
Production GUIYes
Backup Boot FlashYes
Single IOYes
Dual IOYes
Quad IOYes
Isolation FreeYes

Product information

  • USB High speed and high SPI performance, support up to 2Gb SPI Flash
  • In circuit Programming: Program on board SPI Flash
  • Off line Programming: Program SPI Flash direct on the socket
  • Start button feature: Make Batch function in USB mode
  • Standalone mode: Embedded 8GB memory. Program without any computer
  • Support Single, Dual and Quad IO serial communication
  • Program two Serial Flash memories
  • Signal conflict protections
  • Multi-Programmers Capability through USB
  • Support 1.8V low voltage IC
  • Support Windows 2003 and above
  • Support both 32 and 64 bit OS

The SF600Plus USB software tool chain offers high flexibility and fit the different and highest requirements:
Engineering Graphic User InterfaceFor engineers and expert to access advanced features for development, repairing etc.
Production Graphic User InterfaceFor operators in production to control multiple programmers and improve the throughput.
Command line interfaceCustomer software can control the multi SF600Plus programmers.
HardwareSF600Plus is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF600Plus 2x10 header pin out. DediProg also provides the SF600Plus ISP Cable which is used to connect the programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600Plus ISP Cable 2x6 pin out.
Hardware Requirement for ISPTo have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes above.

Recently viewed