










Isolated Multifunction Touch Meter
100 MHz, 2 channels handheld multifunctional oscilloscope, multimeter and recorder. The MS510S has serial bus trigger and decoding capabilities, graphic and in text mode.
What's included
- 250MHz, 10X probe
- Multimeter table pen line
- Power adapter 100~240V, 50~60Hz, 2A; DC 12V/5A
- 7.4V/6000mAh lithium battery
- USB cable: Mini USB 2.0
- Banana Jack
My AutoQuote | Easy & Fast
Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.
More informationSpecifications
Bandwidth | 100MHz |
Rise time | 3.5ns |
Real time sampling rate | Single channel: 1GSa/s, dual-channels: 500MSa/s |
Memory depth | Single channel: 240Kpts, dual-channels: 120Kpts |
Isolated channel | Yes |
Max waveform capture rate | 190,000 wfms/s |
Serial bus trigger | UART, LIN, CAN, SPI, I2C, 1553B, 429 |
VERTICAL SYSTEM | |
Channels | 2 oscilloscope channels, 1 multimeter channel |
Limited bandwidth | 20MHz |
Coupling modes | DC, AC, GND |
Input impedance | Parallel 1M Ohm ±1% with 15pF ±3pF |
Vertical sensitivity range | 5mV/div - 50V/div |
Vertical resolution | 8bits |
Max voltage input | 600V CAT II 300V CAT III |
Floating voltage from CHs to GND | 1000V CAT II 600V CAT III |
DC vertical gain accuracy | 5mV/div - 50V/div, 2.0% |
HORIZONTAL SYSTEM | |
Timebase | 4ns/divs 10s/divs |
Timebase delay range | -12divs to 50s |
Timebase accuracy | 20ppm |
Sample mode | Normal average, pk-pk envelope |
Dynamic record | Yes |
Store waveform | Yes, support internal waveform storage and flash disk storage |
TRIGGER SYSTEM | |
Trigger types | Edge, pulse, logic, video (PAL, NTSC, SECAM, 720P, 1080I, 1080P) serial bus (UART, LIN, CAN, SPI, I2C, 1553B, 429) |
Trigger coupling | DC, AC, High-frequency suppression, Low-frequency suppression, Noise suppression |
Trigger modes | Auto, normal, single |
Trigger source | CH1, CH2, external |
Trigger inhibition range | 200ns - 10s |
MEASUREMENT | |
Automatic measurements | 31 types |
Cursor types | Horizontal cursor, vertical cursor, cross cursor |
MATH | |
Operator | + , - , * , / |
FFT window settings | Rectangular, Hamming, Blackman-Harris, Hanning |
DISPLAY FEATURES | |
Display screen | 5.7 inch TFT LCD touch screen |
Resolution | 640*480 |
3D waveform display | No support |
Grid of waveform display zone | Horizontal 12 divs * vertical 8 divs |
Format | YT mode , XY mode |
Interpolation method | Sin(x) /x |
Persist | Auto, 100ms - 10s or infinity |
I/O PORT | |
Mini USB2.0 | Connect to PC |
USB2.0 | Connect to Flash disk |
MULTIMETER | |
Multimeter type | 10 physical measurements such as voltage, current, resistance, capacitance, diode , etc |
Multimeter accuracy | 5000 counts |
Multimeter display | Max, average, min, values with time stamp; relative measurement |
DATA LOGGER | |
Logger content | Multimeter measurements, oscilloscope measurements, oscilloscope waveforms |
Logger timebase | Multimeter measurements,10s/div ~ 20min/div |
Logger timebase | Oscilloscope measurements 10s/div ~ 20min/div |
Logger timebase | Oscilloscope waveform 100us/div ~ 2min/div |
Logger time length | 49s to infinity |
POWER | |
Power adapter | Input: 100-240VAC, 50-60HZ, 2A; output: 12VDC, 5A |
Battery | Capacity: 7.4V/6000mAh, Work time: 4-5 hours |
WORK ENVIRONMENT | |
Temperature | -20°C - +50°C |
Humidity | < 85%RH |
DIMENSION | |
Size | 254mm*160mm*60mm |
Weight | Main unit: 1380g (no battery), battery(standard): 276g |
Product information
Features |
|
I2C serial bus decoding graphic mode | This mode gives you a graphical view of the serial bus data so you can see address and data in correlation to other signals. |
I2C Serial bus decoding | The text view shows the bus data in a list form showing time, address, data and other columns for every bus transaction. |
High refresh oscilloscope rate | Capture rate means how many waveforms acquisition per seconds your scope can acquire, process and display. "Dead-time" is the time it takes to process and then display an acquired waveform before re-arming it's triggering for next acquisition. The dead time of traditional oscilloscopes is far more than "display time", making the signal occurred during dead time unable to be captured. High capture rate scopes reduces dead time so that abnormal signals can be caught faster and more accurately. |
Triggers | Buil-in video triggers for PAL, NTSC, SECAM, 720P, 1080P |
31 auto measurements | Just select the type of measurement you want to do and you'll have the data right on the screen. |
DMM | 13 physical measurements such as AC/DC voltage, current, resistance and many more. |