Serial Flash Emulator EM100Pro-G2
The Dediprog EM100Pro-G2 SPI NOR Flash Emulator have integrated high-speed DRAM memory to offer the best code updating performances. This advanced tool has been designed in close cooperation with the SPI NOR Flash suppliers to emulator the behavior of all the SPI NOR Flash on the market and also the next generation SPI NOR Flash.
- Minutes becomes seconds for SPI NOR Flash code update (3 seconds to update 512Mb SPI Flash!)
- Save up to 1 hour/day for your development and reduce your time to market
- Debug efficiently your application through the available SPI bus with the SPI Trace, SPI Trigger, SPI Hyper Terminal for debug messages
- Develop your own application debugger via the bidirectional SPI Hyper terminal and control application from your host PC
- EM100Pro-G2 can connect with Intel motherboard by specific adaptor ISP-ADP-Intel-C (Option)
- EM100Pro-G2 x 1
- USB 2.0 cable x 1
- AC switching power adapter x 1
- 2.54mm 2x10 to 2.54mm 2x5 cable x 1
- 1.27mm 2x4 to 1.27mm 2x4 cable x 1
- 1.27mm 2x4 to 1.27mm 2x4 cable 2.5cm x 1
- 1.27mm 2x8 to 1.27mm 2x8 cable x 1
- 2.54mm 2x10 to 1.27mm 2x4/2x8 SO connection adaptor x 1
- 12cm EM100Pro split cable with grabber clip x 1
- EM100Pro DIP cable x 1
- 1.27mm 2x8 SMT male header (10.3mm) x 4
- 1.27mm 2x4 SMT male header (6.0mm) x 4
- 1.27mm 2x4 SMT male header (10.3mm) x 4
- 15cm single wire with 2.54mm Dupont head x 5
- EM100Pro Reference Flash Adaptor (SO8W) x 1
- EM100Pro Reference Flash Adaptor (SO16W) x 1
- Grabber Clip x 2
- Software CD x 1
My AutoQuote | Easy & Fast
Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.More information
|SPI Flash Emulation: Up to 512Mbit SPI NOR
|SPI Flash Emulation of two Serial Flash (up to 2*256Mb)
|SPI Protocol analyzer
|SPI Protocol storage memory
|SPI debug messages (hyper terminal)
|Universal header compatible
|EM100Pro-G2 provides engineers with a flexible development and testing tool for any embedded project that uses an external SPI NOR Flash. It provides quick, in-circuit firmware test cycles during development.
|EM100Pro-G2 increases productivity by downloading firmware code or data into the emulator in a few seconds for density as large as 512Mb. In addition, it provides "SPI BUS Analyzer" feature by collecting all the SPI command and data on the SPI bus in order to help the debugging process.
|The EM100Pro-2 will speed up your firmware development and testing by eliminating the need to remove-erase-program and re-install SPI flash each time you test a code change., If you want to stop the "program/insert/boot/remove/erase" cycle, then this is the tool for you.
|The EM100Pro-G2 has two 2.54mm pitch males connectors of:
|EM100Pro-G2 is designed with ISP header, through different cables/adaptors, it can connect to the PCB board directly. Please refer to Table 1 for EM100Pro-G2 2x10 header pin out.
|DediProg also provides the EM100Pro-G2 ISP Cable which is used to connect the EM100Pro-G2 programmer to the 2X5 2.54mm ISP Pin Header on board, please refer to Table 2 for the EM100Pro-G2 ISP Cable 2x5 pin out.