SystemBase BASSO-1010UC
USB to RS-422/485 Converter

  • Interface: Serial, USB

USB serial communications interface of the RS-422/RS-485

The BASSO-1010UC enables easy and fast installation of serial communications ports into the system via USB bus. Equipped with USB 2.0, it supports serial communication speed up to 921.6Kbps and ±15kV surge protection providing compatibility and reliability. LED showing serial communication status has appealing design in addition to debugging purpose. The BASSO-1010UC supports the serial communications interface and is used in various fields, including R&D, building and factory automation.

  • USB to 1port RS-422/485 Converter
  • RS-422/485 Auto Toggling by Hardware
  • Maximum Communication Speed: 921.6kbps
  • Slew-Rate Limit Control
  • Built-in ±15kV Surge Protection

What's included

  • 1x USB device BASSO-1010UC
  • 1x Latching USB Cable Applied

SystemBase BASSO-1010UC
USB to RS-422/485 Converter

  • Interface: Serial, USB

art : BASSO-1010UC
€ 40 excl. VAT
€ 50 incl. VAT

My AutoQuote | Easy & Fast

Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.

More information

Specifications

Interface
RS422/485(Terminal Block)
Number of ports
1
ConnectorDE-09P (DB-9 Male)
Maximum Speed921.6 kbps
Signal Lines
RS422: TXD+, TXD-, RXD+, RXD-
RS485: TRXD+, TRXD-
Surge Protection
400W Pulse Surge Protection (10/1000µs)
15kV ESD Protection
Dip Switch
RS422/485 Selectable
Termination Resistor Selectable
Slew Rate Selectable
LED
TXD, RXD
Dimension (W x L x H)79.45 x 40.0 x 22.6mm
Weight
49g


Product information

Latching USB Cable Applied
Latching USB Cable applied to BASSO-1010UC has a latches on the USB connectors which provides accidental detachment. It is compatible with the existing USB 2.0 connectors.
Auto TogglingBASSO-1010UC has a built-in hardware feature that performs automatic toggling to prevent device from sending data at the same time causing a crash. This function prevents the RS-422 from forming a multi-drop network or crashing between output signals on the RS-485 network. As this function is provided by hardware side, setting interface mode with a switch enables auto toggling for each interface.
Slew-Rate Limit ControlThe BASSO-1010UC has a slew rate limiting function that inhibits electromagnetic emissions when communicating in RS-422/RS-485 interface. When this function is activated, the maximum communication speed is limited to 250Kbps. However, this function prevents malfunctioning of equipment in electromagnetic-sensitive environments such as hospitals and laboratories.

Recently viewed