Multi-Protocol USB Host Adapter | Cross-Platform | ARM Cortex®
The Binho Nova brings Multi-Protocol USB Host Adapters into the 21st Century. No more fumbling through development with cumbersome, clunky, out-dated adapters. Let your productivity soar to new heights! Device drivers are already included on most operating systems, you'll be up running in no time.
With support for I2C, SPI, UART, 1-WIRE, SWI protocols all in one slim, robust package, it may even be the last adapter you’ll ever need. Only 42,2 x 87,5 x 8,8 mm small!
Benefits
- Built on modern state-of-the-art 32-bit ARM technology
- "Best-in-class" I2C Peripheral implementation
- Can act as a I2C peripheral with no PC overhead
- Automated Control via Python library with set of useful functions
- Easy to automate applications
- Can "take decisions" as a stand-alone device
- Plug´n play - easy setup Windows, MacOS, Linux
- Robust | Small | Anodized Aluminium enclosure
Typical Applications
- Firmware Development
- Proof of Concept Development
- System Debugging
- Automated Hardware/Firmware Testing
- FLASH | EEPROM | FRAM Programming
What's included
- 1x USB Host Adapter
- 1x Soft-shell Zippered Case
- 1x Pinout Insert Card
- 1x USB-C to USB-A Cable
- 1x Breadboard Breakout
My AutoQuote | Easy & Fast
Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.
More informationSpecifications
| Operating system | Windows, MacOS, Linux |
| Power | USB, also downstream power to test circuits |
| USB interface | USB 2.0 Full Speed 12Mbps | Type C connector |
| Supported protocols | I2C | SPI | UART | Dallas 1-Wire | Atmel Single-Wire |
| SPI speed | 1MHz to 12MHz in 1kHz steps |
| I2C speed | 100kHz to 3.4MHz in 1kHz steps |
| UART baud rate | 1000000 bps max |
| Outputs | 1 x DAC |
| Inputs | 5 x ADC |
| Other support | GPIO / Interrupt / PWM Support |
| Design | Robust, low-profile aluminum enclosure |
| Size | Small with its 42,2 x 87,5 x 8,8 mm |
| Field-upgradeable firmware | Yes |
Product information
| No code? No problem! | With an intuitive user interface, the Binho software is the quickest, simplest way to get up and running with your new Binho Nova. Whether you're working in a Windows, Linux, or macOS environment, the cross-platform solution has you covered with support for GPIO, I2C, SPI, and UART functionality. |
| Cross-Platform | No longer constrained to any particular operating system. Beyond that, device drivers are already included on most operating systems (Win10, Mac OSX, Ubuntu). You'll be up and running in no time. |
| Multi-protocol | Support for I2C, SPI, UART, (Dallas) 1-Wire, and (Atmel) SWI, as well as basic GPIO and ADC functionality. There's even a single-channel DAC output for those moments when you need to stimulate your circuit with a particular voltage. |
| Downstream Power | Sometimes you just need a few mA from a 3V3 rail or perhaps just the 5V USB Bus power. Both of these power sources are made available for your convenience. |
| Manual Control via ASCII Terminal | Simply open up the COM port with your favorite terminal application and use the intuitive human-readable commands to send and receive data. Perfect for when you're exploring IC functionality or while developing device drivers for your embedded project. It doesn't get much easier than that. |
| Automated Control via Python | Easily write test scripts or integrate host adapter control from your own application using the same ASCII command set. The Binho cross-platform Python library makes development a breeze. No wasting your valuable time with DLL files or other complicated setups, automation can be easily achieved in any programming language that can open up a COM port. |
