Total Phase 34-Pin Header Cable 40mm

34-Pin to 34-Pin Header Cable 40mm

This is a replacement cable for the PromiraTM Serial Platform. One 34-pin end has a locking friction ramp to ensure good connectivity with the Promira platform while the other 34-pin end is designed for easier connection and removal to your project board. This cable is compatible with the EEPROM Socket Board - 10/34, the Flash SOIC-16 Socket Board - 10/34, and the Flash SOIC-8 Socket Board - 10/34 programming accessory boards.

What's included

  • 34-Pin to 34-Pin Header Cable

Total Phase 34-Pin Header Cable 40mm


art : TP510710
€ 123
excl VAT

My AutoQuote | Easy & Fast

Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.

More information

Product information

FeaturesThe 34-Pin Header Cable has a 34-pin box header that attaches to the Promira Serial Platform. The connector is a standard 2x17, 0.079 inches (2.00 mm) pitch IDC type keyed box connector. The cable is only 6 inches (15.2 cm) long to minimize signal degradation.

Many of our other accessory boards utilize Total Phase's standard 10-pin header. The I2C/SPI Activity Board, the CAN/I2C Activity Board Pro, and the High-Speed SPI Flash Demo Board require a 10-pin connector. Please select the 34-Pin: 10-Pin Header Cable to enable connectivty for these acessory boards with the Promira platform.

  • Don't have space for a 5x2, 0.100 inches or a 17x2, 0.079 inch (2.00 mm) header on your test board?
  • Want to make use of a header that doesn't have the same pin-out as the Aardvark I2C/SPI Host Adapter ribbon cable or the Beagle I2C/SPI Protocol Analyzer ribbon cable?
  • Don't want to create an adapter board to interface with your target?

The 10-Pin Split Cable, 10-Pin Grabber Clip Split Cable, 34-Pin Split Cable or 34 Pin Grabber Cable may be the ideal solutions for you.

For more advanced or power intensive applications, the 34-pin cables are recommended because they provide additional connectivity to your project, enabling features not available with the 10-pin cables. Please note, specific pins and functionality are determined by the applications licensed on your Promira Serial Platform.

Recently viewed